SPAL 511 cfm Double Blower 011-A54/2C/I-22 (12v / 3 speeds)
Part No. 30004516D
SPAL TYPE:011-A54/2C/I-22 12V RA(1)3VCV4 SX S.E.
- 12v
- Double Blower Wheel
- 511 CFM
- 32.7A current draw
- 3 Speeds (Special Large Aluminium resistor supplied)
- EMC filter reducing motor acoustic noise
- Super Fan Balancing for smoother, quieter operation
- Grounding cable included
- Jumper between electric motor and resistor (NO WIRE HARNESS SUPPLIED)
- View Product Details / Technical Specifications
- No application data available / applicable
- Related items: None
Weight:
3.288kg
Shipping costs are not available for this item
Part / Product Specification and Notes
| Maximum Airflow (at zero Static Pressure) |
511CFM (860m³/h) |
| Standard Features |
Long life |
|
36 Months Guarantee |
| Operating Voltage |
12v (tested at:13v) |
| IP Rating |
IP30 |
| SPAL Type/Description |
011-A54/2C/I-22 12V RA(1)3VCV4 SX S.E. |
|
/I: EMC internal motor filter |
|
RA(1) Special Large Aluminium resistor |
|
3V: 3 speeds |
|
CV: Jumper between electric motor and resistor (without wire harness) |
|
2C: Double ball bearing in electric motor |
|
4: 3 speeds + jumper with 4mm² cable section (std cable section is 2.5mm²) |
|
SX: resistor on left side of the blower (seen from behind) |
|
S.E.: Super Fan Balancing |
|
CAVO MASSA: Includes grounding cable |
| Mounting Bolt/Screw |
M4 screw |
| Mounting Torque |
3(+1/-0) Nm |
| Certifications |
UNI EN ISO 9001:2008 |
|
ISO TS 16949 |
|
ISO 14001 |
| Notes |
This model must be used with a Max. current draw of 35 Amp |
For additional technical details / dimensions please refer to catalogue pages
Technical Drawing
Wiring Guide for 3 Speed Resistors
A 3 speed resistor pack is included with this blower allowing it to be operated at low, medium and high speed settings. Please ensure the fan switch can handle the current draw at maximum power. For 3 speeds you will need a 4 position switch (low, medium, high, off) using wire size of at least 2.5mm²
3 Speed Resistor Wiring Diagram
|
SPAL 3 Speed Resistor Contacts
- Contact MOTOR should be connected to the +ve terminal on the blower motor with the other terminal on the motor leading to GROUND
- Contact 3+ on the resistor should be connected to the HIGH setting on the swtich (+ve supply)
- Contact 2+ on the resistor should be connected to the MEDIUM setting on the swtich (+ve supply)
- Contact 1+ on the resistor should be connected to the LOW setting on the swtich (+ve supply)
|
Performance Table
| Centrifugal Blowers 12v - 24v DC |
12v Double Blowers
|
Products described as suitable for original manufacturers on this site are SPAL branded replacement parts and are not manufactured by the Original Equipment Manufacturer (OEM). Original Manufacturer’s names, part numbers and descriptions are quoted for reference purposes only and are not intended to indicate or suggest that our replacement parts are made by the OEM. All SPAL products sold on this website are genuine SPAL Automotive products manufactured in Italy.